An important safety feature to every
car, windshield wipers enhance your vision while driving in rain, fog and help
you to keep the glass clean for a clearer view.
They’re an absolute necessity!
The problem is that just like
everything else even these wipers do not last forever. If the windshield wipers
of your car are already streaking water, getting squeaky or leaving a milky
film while wiping out, you know that you need to get them changed ASAP.
These significant safety tools need
replacing once in every few years as the rubber blades dry out over time due to
regular usage or exposure with the sun. Once they stop performing well, you
ought to get the new ones to protect your car glass. But before you decide to
buy the new ones you can try to remove the dirt and hardened rubber stuck in
the blades for their better functioning. These little hacks sometimes work
really well to enhance the life of your old wipers.
There are times when you can’t help
but have to change the old wiper with the new one when it’s no longer in use.
So, let’s understand how you can replace your windshield wipers easily and
efficiently.
Step1: Buy New
Blades
There, if you’re planning to buy the
new blades, make sure you know the exact model of your car. The model name,
make, year and further specifications- all of it!
Give this information to the nearest
auto body shop executive and ask for options. Richmond hill auto glass is one such
place to go to for quality replacing and repairing services. However, you can
also buy the blades and change them yourself. The blades will range from a bare
minimum of $5 to $25 at Richmondhillautoglass or any other good auto body
store. A good move is to go with a medium quality blade which is not too cheap
and not too expensive. Also, prefer getting both the blades replaced at once,
if one has gone bad, the other can’t do much better.
Step 2: Remove The
Old Wipers
Pull the entire assemble of the
wiper up so that it gets vertical. Then move the blade making a perpendicular
angle with the arm. The hinge will be visible and you will notice a small tab
on one side of the hinge. Get that tab out and get the wiper down towards the
car.
Next, remove the blade through one
of the holes on it once the blades and arms are separated from one another. As
the blades are removed, the wiper arms become like unprotected metal,
therefore, don’t leave the arm up. They will ruin your windshield if they feel
down on it. Try laying it down in a way that it catches the arm incase it falls
down.
Step 3: Attach The
New Blades
Now, take the new wiper and put the
arm using the appropriate hole so that it pushes the wiper up.
To see which hole it goes through,
turn the hinge perpendicular to the arm and push it up so that the arm’s hook
gets over the hinge. As the arm gets inside the hole, put the hook over the
hinge and push them together. You’ll hear a peculiar click sound once it’s
done. Perhaps you’ll observe a huge different in their performance level when
compared to the older ones.
Put the arm down, rinse it, repeat
it and you’re all set to use your new wipers!
You can choose to throw your old
wipers or reuse them somewhere else. For instance, you can use them to clean
your bathroom glass or turn them into a tension wrench or something out of your
creativity. All that depends on what you would want to do with them.
Hope
this information help you!
Drop
your reviews and suggestions in the comments section below.
