It’s inevitable that your car
glass can get dirty and scratched up. Things like pebbles and dust and sand can
get on your car glass and possibly damage it. Whenever you see scratches like
this it might be a good idea to consider polishing your cars glass to remove
the scratches.
According to many Whitby auto
glass professionals, the first thing you want to
do is choose
a
good time and place to do this. You
don’t want to be in direct sunlight or a new really dry area when cleaning and
polishing the windows of your car. If you were in areas like this could
possibly try out the glass cleaner and leave streaks behind on your windshield
which defeats what you actually did. You want to choose the right tools when
cleaning your windows. You should purchase a glass cleaner that is specific for
automotive use because it’s better than the regular house glass cleaner.
Cleaners for your house often contain ammonia and other chemicals that could be
dangerous to use on your car and dangerous for you in the passengers in your
car.
Roll
the windows of your car down just so that you can have clear access to the top
edge of the glass. This way you can clean your windows properly and thoroughly.
Once you do this you can spray the glass cleaner on your windows. You’ll want
to spray the cleaner on a microfiber cloth and clean the window from one side
to the other so that no streaks are left on the glass when it dries. You want
to do this on the exterior and interior side of the glass. Once you do this you
want to use the dry side of your microfiber cloth and remove any of the
remaining moisture on your windows and dry them in the same motion in which you
cleaned them. Once you do this you want to roll your windows back up and clean
the bottom half in the same fashion.
When the windows
are polished, you can move onto your front and back windshield. You will do
this in the same way that you did your other windows. Once you do this you must
rinse everything with water. Once you have gotten all the dirt off of your
windows you can remove any streaks that you may have left behind or any residue
from the cleaner or cloth by using water. Whitby auto glass workers
suggest that you gently spread the glass and then wipe it dry with a clean
microfiber towel.
Once
the cleaning is done you can now select a glass polish that you can use on your
car. There are many different types of glass polishers that are available to
you. You can either select a glass polishing kit that comes with polishing
discs to remove the more severe scratches in your glass or you can buy a high
quality glass restore to remove any light scratches or spots on the glass. You
want to use a low speed rotary polisher. It’s recommended that the speed
setting be set in between 1000 and 1200 RPM. Also be sure to check and make
sure that your polisher has a polishing pad on it. You want to put your
lubricating oil on the polishing pad to help the polish spread more and reduce
the amount of polish will actually need to use. Once you do this you can apply
the polish to the polishing pad.
Start
at the upper corner of the glass when polishing. You want to hold the handle
with your dominant hand and use your other hand to guide the polisher. Be sure
to not apply pressure since to tool will apply pressure on its own. Remember to
cover the entire glass and get every part of the glass one polishing. After
that, buff the remaining polish residue away with a clean microfiber cloth and
circular motions. As you do this, you need to apply a glass ceiling to help the
glass stay smooth and clear for a longer period of time.
Do You Know…
Have you ever
wondered what the big hype about auto glass is? Do you how to clean your
windshield? Our auto glass Toronto experts will
fill you in.
No comments:
Post a Comment